Sliding Door Hardware | 250mm Flush Pulls

Description

Halliday + Baillie Cavity Sliding Privacy Lock Series. The HB690 170mm length privacy sliding door lock includes a snib flush pull inside and emergency release flush pull outside for safe, efficient, locking on bathroom and washroom cavity sliders.

The HB690 comes with a small recessed end pull for easy use to pull the slider from the pocket. Minimum door thickness required is 38mm. For door 35mm-38mm thickness, please order the HB690/35 with shallower flush pulls

Material: Diecast zinc with brass and 316 stainless steel

Backset : 55mm Minimum door thickness : 35mm/38mm

Flush pulls : 170mm x 36mm x 11mm

Suitable for timber or aluminium doors

For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.

Flush pulls are designed to be mounted with the body within the thickness of the door, and the face surface mounted - total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bat to the back of the snib flush pull for example where sets have a flush pull to one side only.

Configurations:
HB 1920LH B – Rectangle Offset Pull Plain - Left Hand
HB 1920RH B – Rectangle Offset Pull Plain - Right Hand
HB 1930LH K – Rectangle Offset Flush Pull Key Hole - Left Hand
HB 1930RH K – Rectangle Offset Flush Pull Key Hole - Right Hand
HB 665 BFP – 250mm Flush Pull
HB 665 IFP – 250mm Flush Pull
HB 665 SFP – 250mm Flush Pull
HB 668 BFP – 250mm Flush Pull
HB 668 SFP – 250mm Flush Pull
HB 677LH BFP – 250mm Offset Flush Pull
HB 677LH IFP – 250mm Offset Flush Pull
HB 677LH SFP – 250mm Offset Flush Pull
HB 677RH BFP – 250mm Offset Flush Pull
HB 677RH IFP – 250mm Offset Flush Pull
HB 677RH SFP – 250mm Offset Flush Pull