Sliding Door Hardware | Flush D Pull

Description

As an update on the popular HB675 Bi-fold Flush Pull, the HB678 has been developed with flexibility in mind. With an integrated D Handle within the flush pull itself, the HB678 does double duty as both flush pull and pull handle.

Useful where flush mounting is required, but the additional grip of a pull handle is desirable. These are suitable for sliding doors, pivot, or bi-fold doors and cabinetry. Unlike our other options suitable for bi-fold, hinge, or pivot doors, the HB678 is a non-handed pull.

Ball bearings in the casing hold the D Handle in place when closed. For the longer 250mm long version, please see the HB679.

All flush pulls have invisible fixing for a pared back contemporary look. Sold individually.

Material: Diecast zinc Flush pulls : 250mm x 46mm x 15mm (from back of face plate)

Suitable for timber or aluminium doors. HB604 timber fixing kit to be ordered separately

For finish options please see our current Finishes Sheet. FLUSH D PULLS ARE NOT AVAILABLE IN POWDERCOAT FINISHES. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.

Flush pulls are designed to be mounted with the body within the thickness of the door, and the face surface mounted - total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee.

Configurations:
HB 678RH – 170mm Flush D Pull
HB 678LH – 170mm Flush D Pull
HB 679RH – 250mm Flush D Pull
HB 679LH – 250mm Flush D Pull